Problems in the processing of precision stamping parts
There are more and more vehicles where precision stamping parts are used now, so some of them are also very popular in precision stamping. Knowing that the service life of vehicles can be protected by precision stamping parts after repairing, these problems can be directly used. Of course, this processing technology has been very mature, and there will be problems in the process of processing, we will introduce you to some frequently asked problems and corresponding solutions! When you are in its precision stamping, there may be expectations that distort this phenomenon, and there are a variety of reasons for this phenomenon, in detail for you in us! If its precision stamping punch from the master to rotate, twist. Then, you need to study and blanking, blanking clearance and need to continue to check the rationality. If you press, bend then you cause instability that needs to be dealt with on its U-shaped and V-shaped bends. The problem to be dealt with is one of the pressure before bending, which is caused by the slippage process. If you precision punch the material, twist, then you need to rush to solve the problem under the resulting form. A study shows that around the world, steel from 60% to 70% is a plate, in which the most, I rush into the finished product. So you can imagine how widely used stamping parts are processed